Aquarium Accessories / Aquarium Hardware

Item # TS-PCHH

The Pipe Clamp Hose Holder

• The pipe clamp is perfect for holding hose over the edge of a tank.
• Suitable for glass up to 10mm.
• Will hold up to 16mm hose.
• Excellent for assisting with water ...

Item # AP-BH-1/2

Aquarium Bulkhead with O Ring ABS 20mm Inner Dia Thread

• Overall size: 46mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) if gluing to PVC ...

Item # AP-BH-1.5

Aquarium Bulkhead with O Ring ABS 48mm Inner Dia Thread

• Overall size: 97.5mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) if gluing to ...

Item # AP-BH-2

Aquarium Bulkhead with O Ring ABS 60mm Inner Dia Thread

• Overall size: 94mm dia
• Diameter is measured as internal sizing
• Made from ABS Plastic
• Recommended to use "Transition Cement" (normally green in colour) ...

Item # TS-ALBC-5

Acrylic Lid Corner Bracket 5mm

• Overall size: 75mm x 75mm x 12mm
• Snaps off into 3 pieces if needed
• Acrylic thickness: 2.5mm
• Gap size: 5mm

Item # TS-ALBC-6

Acrylic Lid Corner Bracket 6mm

• Overall size: 75mm x 75mm x 12mm
• Snaps off into 3 pieces if needed
• Acrylic thickness: 2.5mm
• Gap size: 6mm

Item # TS-ALBC-8

Acrylic Lid Corner Bracket 8mm

• Overall size: 75mm x 75mm x 13mm
• Snaps off into 3 pieces if needed
• Acrylic thickness: 3mm
• Gap size: 8mm

Item # TS-ALBC-10

Acrylic Lid Corner Bracket 10mm

• Overall size: 75mm x 75mm x 13mm
• Snaps off into 3 pieces if needed
• Acrylic thickness: 2mm
• Gap size: 10mm

Item # MX-ALB-6

Acrylic Lid Edge Bracket 6mm

• Overall size: 55mm x 39mm x 18mm
• Acrylic thickness: 2.5mm
• Gap size: 6mm

Item # MX-ALB-8

Acrylic Lid Edge Bracket 8mm

Item # MX-ALB-10

Acrylic Lid Edge Bracket 10mm

Item # MX-ALB-12

Acrylic Lid Edge Bracket 12mm

Item # GPS-BH20A-KIT

Aquarium Bulkhead Kit

• Made from moulded, impact resistant PVC.
• 19mm hose adapter included
• 25mm threaded fitting on outside.
• Bulkhead fitting with rubber washer. Overall length ...More info...
  
  
  Your Price AU$12.95
  (Was AU$29.95 you save AU$17.00

Item # TS-BH32-S

Aquarium Bulkhead and Valve Tap Fitting Set 1 inch BSPT

• Size: Internal Thread dia 32mm
• Suit 46-50mm dia glass hole size

Item # TS-BH20-8mm

Aquarium Bulkhead and Valve Tap Fitting Set 1/2 inch BSPT to 8mm

• Size: Approx 15cm assembled
• Size: Internal Thread dia 20mm
• Can change 8mm barbed outlet to any other 1/2 inch threaded connector, see related products

Item # TS-BH20-S

Aquarium Bulkhead and Valve Tap Fitting Set 1/2 inch BSPT to 90 degree elbow

• Size: Internal Thread dia 20mm
• Suit 36-40mm dia glass hole size
• Can change elbow to any other 1/2 inch threaded connector, see related products

Item # TS-QC12mm

Aquarium Double Tap Quick Release Connector 12mm

• With integrated shut-off valves
• Cleaning the filter is much easier without the mess
• Robust and long life
• Disconnect and connect the hose safely, cleanly and without ...

Item # TS-QC16mm

Aquarium Double Tap Quick Release Connector 16mm

• With integrated shut-off valves
• Cleaning the filter is much easier without the mess
• Robust and long life
• Disconnect and connect the hose safely, cleanly and without ...

Item # TS-BH25-S

Aquarium Bulkhead and Valve Tap Fitting Set 3/4 inch BSPT

• Size: Internal Thread dia 25mm
• Suit 36-40mm dia glass hole size

Item # TS-StrainerS20

Aquarium Strainer 20mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS25

Aquarium Strainer 25mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS32

Aquarium Strainer 32mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerS40

Aquarium Strainer 40mm Outer Diameter Slip Type

• Made from moulded, impact resistant PVC.

Item # TS-StrainerT20

Aquarium Strainer 20mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 20mm thread dia x 62mm long

Item # TS-StrainerT25

Aquarium Strainer 25mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 25mm thread dia (18mm smooth inner dia) x 70mm long

Item # TS-StrainerT32

Aquarium Strainer 32mm Outer Diameter Threaded Type

• Made from moulded, impact resistant PVC.
• Size: 32mm thread dia x 80mm long

Item # TS-Socket-F15mm

PVC Female Faucet Socket 15mm BSP 1/2iinch

• Inner threaded dia size: 20mm
• Inner slip dia size: 26.8mm
• Outer dia size: 21.3mm
• Length: 41.2mm

Item # TS-Socket-F20mm

PVC Female Faucet Socket 20mm BSP 3/4 inch

• Inner threaded dia size: 25mm
• Inner slip dia size: 26.8mm
• Outer dia size: 34.8mm
• Length: 45.6mm

Item # TS-Socket-F25mm

PVC Female Faucet Socket 25mm BSP 1inch

• Inner threaded dia size: 32mm
• Inner slip dia size: 33.7mm
• Outer dia size: 41.5mm
• Length: 49.5mm

Item # TS-Socket-F32mm

PVC Female Faucet Socket 32mm BSP 1 1/4 inch

• Inner threaded dia size: 40mm
• Inner slip dia size: 42mm
• Outer dia size: 51mm
• Length: 51mm

Item # XY-SSS-6M

WALKINGFARM Stainless Steel Lid Bracket 6mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums.  Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 6mm glass
• Glass lid not ...

Item # XY-SSS-8M

WALKINGFARM Stainless Steel Lid Bracket 8mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 8mm glass
• Glass lid not ...

Item # XY-SSS-10M

WALKINGFARM Stainless Steel Lid Bracket 10mm

• Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
• Size: Suitable for tanks with 10mm glass
• Glass lid not ...

Item # TS-Socket-M15mm

PVC Male Socket 15mm BSP 1/2 inch

• Outer threaded dia size: 20mm
• Inner slip dia size: 21.2mm
• Outer dia size: 27mm
• Length: 38.9mm

Item # TS-Socket-M20mm

PVC Male Socket 20mm BSP 3/4 inch

• Outer threaded dia size: 25mm
• Inner slip dia size: 27mm
• Outer dia size: 33.5mm
• Length: 44.8mm

Item # TS-Socket-M25mm

PVC Male Socket 25mm BSP 1 inch

• Outer threaded dia size: 32mm
• Inner slip dia size: 33.4mm
• Outer dia size: 40.3mm
• Length: 48.8mm

Item # TS-Socket-M32mm

PVC Male Socket 32mm BSP 1 1/4 inch

• Outer threaded dia size: 40mm
• Inner slip dia size: 42.2mm
• Outer dia size: 50.5mm
• Length: 57mm

Item # 270576BK

Aquarium Bulkhead with O Ring PVC 21mm Inner Diameter

• Made from moulded, impact resistant PVC.
• Elbows and strainers also available in slip fittings.
• Threaded fitting on outside.
• Passes water through sides or bottom of ...

Item # AM41725

Aquarium Bulkhead with O Rings ABS 26.75mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 25mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # AM41732

Aquarium Bulkhead with O Rings ABS 33.55mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 32mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # AM41740

Aquarium Bulkhead with O Rings ABS 40mm Inner Diameter

• Made from ABS plastic.
• Threaded fitting on outside.
• Passes water through sides or bottom of tanks.
• Suit 40mm (outer diameter) PVC pipe.
• Suit glass hole size: ...

Item # TSBulkT20mm

Aquarium Bulkhead 1/2 inch with O Rings PVC 20mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 35mm - 39mm

Item # TSBulkT25mm

Aquarium Bulkhead 3/4 inch with O Rings PVC 25mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 36mm - 39mm

Item # TSBulkT32mm

Aquarium Bulkhead 1 inch with O Rings PVC 32mm Inner Diameter

• Threaded fitting on inside/outside.
• Passes water through sides or bottom of tanks.
• Suit glass hole size: 45mm - 49mm

Item # H/S-22

Diamond Coated Glass Hole Saw 22mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 22mm (7/8") diameter hole size.
• Suitable for standard 15mm bulkhead fitting.
• Made in Hong ...

Item # H/S-28

Diamond Coated Glass Hole Saw 28mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 28mm (1 1/8") diameter hole size.
• Suitable for standard 20mm bulkhead fitting.
• Made in Hong ...

Item # H/S-35

Diamond Coated Glass Hole Saw 35mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 35mm (1 3/8") diameter hole size.
• Suitable for standard 25mm bulkhead fitting.
• Made in Hong ...

Item # H/S-42

Diamond Coated Glass Hole Saw 42mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 42mm diameter hole size.
• Suitable for standard 32mm bulkhead fitting.
• Made in Hong ...

Item # H/S-45

Diamond Coated Glass Hole Saw 45mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 45mm (1.75") diameter hole size.
• Suitable for standard 40mm bulkhead fitting.
• Made in Hong ...

Item # H/S-50

Diamond Coated Glass Hole Saw 50mm

• Diamond Coated hole saw.
• Suitable for glass, tile and ceramic.
• 50mm (2") diameter hole size.
• Suitable for standard 40mm bulkhead fitting.
• Made in Hong ...